.\" Man page generated from reStructuredText.
.
.TH "GAMMU-SMSDRC" "5" "Oct 03, 2020" "1.42.0" "Gammu"
.SH NAME
gammu-smsdrc \- gammu-smsd(1) configuration file
.
.nr rst2man-indent-level 0
.
.de1 rstReportMargin
\\$1 \\n[an-margin]
level \\n[rst2man-indent-level]
level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
-
\\n[rst2man-indent0]
\\n[rst2man-indent1]
\\n[rst2man-indent2]
..
.de1 INDENT
.\" .rstReportMargin pre:
. RS \\$1
. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
. nr rst2man-indent-level +1
.\" .rstReportMargin post:
..
.de UNINDENT
. RE
.\" indent \\n[an-margin]
.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
.nr rst2man-indent-level -1
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.SH DESCRIPTION
.sp
gammu\-smsd reads configuration from a config file. It\(aqs location can be
specified on command line, otherwise default path \fB/etc/gammu\-smsdrc\fP
is used.
.sp
This file use ini file syntax, see ini\&.
.sp
Configuration file of gammu\-smsd consists of at least two sections \-
\fB[gammu]\fP and \fI\%[smsd]\fP\&. For gammu\-smsd\-sql
you can also use \fI\%[sql]\fP and \fI\%[tables]\fP\&.
.sp
The \fB[gammu]\fP section is configuration of a phone connection
and is same as described in gammurc with the only exception that
\fI\%LogFile\fP is ignored and common logging for gammu library and
SMS daemon is used. However the \fBLogFormat\fP directive still
configures how much messages gammu emits.
.INDENT 0.0
.TP
.B [smsd]
The \fI\%[smsd]\fP section configures SMS daemon itself, which are described in
following subsections. First general parameters of SMS daemon are listed and
then specific parameters for storage backends.
.UNINDENT
.INDENT 0.0
.TP
.B [include_numbers]
List of numbers from which accept messages, see \fI\%Message filtering\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B [exclude_numbers]
List of numbers from which reject messages, see \fI\%Message filtering\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B [include_smsc]
List of SMSC numbers from which accept messages, see \fI\%Message filtering\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B [exclude_smsc]
List of SMSC numbers from which reject messages, see \fI\%Message filtering\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B [sql]
Configure SQL queries used by gammu\-smsd\-sql, you usually don\(aqt have to modify them.
.sp
\fBSEE ALSO:\fP
.INDENT 7.0
.INDENT 3.5
Configurable queries
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B [tables]
Configure SQL table names used by gammu\-smsd\-sql, you usually don\(aqt have to modify them.
.sp
\fBSEE ALSO:\fP
.INDENT 7.0
.INDENT 3.5
Configurable tables
.UNINDENT
.UNINDENT
.UNINDENT
.SH GENERAL PARAMETERS OF SMS DAEMON
.INDENT 0.0
.TP
.B Service
SMSD service to use, one of following choices:
.INDENT 7.0
.TP
.B \fBFILES\fP
Stores messages in files, see gammu\-smsd\-files for details.
.TP
.B \fBNULL\fP
Does not store messages at all, see gammu\-smsd\-null for details.
.TP
.B \fBSQL\fP
Stores messages in SQL database, see gammu\-smsd\-sql for details,
choose database type to use by \fI\%Driver\fP\&.
.sp
New in version 1.28.93.

.TP
.B \fBMYSQL\fP
Deprecated since version 1.28.93: Use \fI\%Service\fP = \fBSQL\fP and \fI\%Driver\fP = \fBnative_mysql\fP instead.

.sp
Compatibility option for older configuration files, stores messages in
MySQL database, see gammu\-smsd\-mysql for details.
.TP
.B \fBPGSQL\fP
Deprecated since version 1.28.93: Use \fI\%Service\fP = \fBSQL\fP and \fI\%Driver\fP = \fBnative_pgsql\fP instead.

.sp
Compatibility option for older configuration files, stores messages in
PostgreSQL database, see gammu\-smsd\-pgsql for details.
.TP
.B \fBDBI\fP
Deprecated since version 1.28.93: Use \fI\%Service\fP = \fBSQL\fP and \fI\%Driver\fP = DBI driver instead.

.sp
Compatibility option for older configuration files, stores messages in
any database supported by libdbi, see gammu\-smsd\-dbi for details.
.UNINDENT
.sp
\fBNOTE:\fP
.INDENT 7.0
.INDENT 3.5
Availability of backends depends on platform and compile time configuration.
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B PIN
PIN for SIM card. This is optional, but you should set it if your phone after
power on requires PIN.
.UNINDENT
.INDENT 0.0
.TP
.B NetworkCode
Network personalisation password. This is optional, but some phones require it
after power on.
.UNINDENT
.INDENT 0.0
.TP
.B PhoneCode
Phone lock password. This is optional, but some phones require it after power
on.
.UNINDENT
.INDENT 0.0
.TP
.B LogFile
File where SMSD actions are being logged. You can also use special value
\fBsyslog\fP which will send all messages to syslog daemon. On Windows another
special value \fBeventlog\fP exists, which will send logs to Windows Event Log.
.sp
If you run SMSD as a system daemon (or service), it is recommended to use
absolute path to log file as startup directory might be different than you
expect.
.sp
Default is to provide no logging.
.sp
\fBNOTE:\fP
.INDENT 7.0
.INDENT 3.5
For logging to Windows Event Log, it is recommended to install Event Log
source by invoking \fI\%gammu\-smsd \-e\fP (this is automatically done during
installation of Gammu).
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B LogFacility
Facility to use on logging backends which support it (currently only
syslog). One of following chouces:
.INDENT 7.0
.IP \(bu 2
\fBDAEMON\fP (default)
.IP \(bu 2
\fBUSER\fP
.IP \(bu 2
\fBLOCAL0\fP
.IP \(bu 2
\fBLOCAL1\fP
.IP \(bu 2
\fBLOCAL2\fP
.IP \(bu 2
\fBLOCAL3\fP
.IP \(bu 2
\fBLOCAL4\fP
.IP \(bu 2
\fBLOCAL5\fP
.IP \(bu 2
\fBLOCAL6\fP
.IP \(bu 2
\fBLOCAL7\fP
.UNINDENT
.sp
New in version 1.30.91.

.UNINDENT
.INDENT 0.0
.TP
.B DebugLevel
Debug level for SMSD. The integer value should be sum of all flags you
want to enable.
.INDENT 7.0
.TP
.B 1
enables basic debugging information
.TP
.B 2
enables logging of SQL queries of service backends
.TP
.B 4
enables logging of gammu debug information
.UNINDENT
.sp
Generally to get as much debug information as possible, use 255.
.sp
Default is 0, what should mean no extra information.
.UNINDENT
.INDENT 0.0
.TP
.B CommTimeout
How many seconds should SMSD wait after there is no message in outbox
before scanning it again.
.sp
Default is 30.
.UNINDENT
.INDENT 0.0
.TP
.B SendTimeout
Shows how many seconds SMSD should wait for network answer during sending
sms. If nothing happen during this time, sms will be resent.
.sp
Default is 30.
.UNINDENT
.INDENT 0.0
.TP
.B MaxRetries
How many times will SMSD try to resend message if sending fails. This
is tracked per message and currently supported only with SQL backends.
.sp
Default is 1.
.UNINDENT
.INDENT 0.0
.TP
.B RetryTimeout
How long to wait before resending failed message (needs to be enabled by
\fI\%MaxRetries\fP).
.sp
Is used in \fBupdate_retries\fP\&.
.sp
Default is 600.
.UNINDENT
.INDENT 0.0
.TP
.B ReceiveFrequency
The number of seconds between testing for received SMSes, when the phone is
busy sending SMSes. Normally a test for received SMSes is done every
\fI\%CommTimeout\fP seconds and after each sent SMS.
.sp
Default is 15.
.UNINDENT
.INDENT 0.0
.TP
.B StatusFrequency
The number of seconds between refreshing phone status (battery, signal) stored
in shared memory and possibly in service backends. Use 0 to disable.
.sp
You might want to increase this for higher throughput.
.sp
Default is 60.
.UNINDENT
.INDENT 0.0
.TP
.B LoopSleep
The number of seconds how long will SMSD sleep before checking for some
activity. Please note that setting this to higher value than 1 will have
effects to other time based configurations, because they will be effectively
rounded to multiply of this value.
.sp
Setting this to 0 disables sleeping. Please note this might cause Gammu to
consume quite a lot of CPU power as it will effectively do busy loop.
.sp
This sleep is utilized only if the main loop (sending and receiving
messages) takes less than defined time. For example if you set LoopSleep to
5 seconds and sending messages take 10 seconds, no sleep will be done in
the iteration which is sending messages. Also the sleep time is lowered by
the already processed time.
.sp
Default is 1.
.UNINDENT
.INDENT 0.0
.TP
.B MultipartTimeout
The number of seconds how long will SMSD wait for all parts of multipart
message. If all parts won\(aqt arrive in time, parts will be processed as separate
messages.
.sp
Default is 600 (10 minutes).
.UNINDENT
.INDENT 0.0
.TP
.B CheckSecurity
Whether to check if phone wants to enter PIN.
.sp
Default is 1 (enabled).
.UNINDENT
.INDENT 0.0
.TP
.B HangupCalls
New in version 1.34.0.

.sp
Whether to automatically hangup any incoming calls.
.sp
Default is 0 (disabled).
.UNINDENT
.INDENT 0.0
.TP
.B CheckBattery
Whether to check phone battery state periodically.
.sp
Default is 1 (enabled).
.UNINDENT
.INDENT 0.0
.TP
.B CheckSignal
Whether to check signal level periodically.
.sp
Default is 1 (enabled).
.UNINDENT
.INDENT 0.0
.TP
.B CheckNetwork
New in version 1.37.90.

.sp
Whether to check network status periodically.
.sp
If phone is reported to be not on the network, SMSD
tries to power it on.
.sp
Default is 1 (enabled).
.UNINDENT
.INDENT 0.0
.TP
.B ResetFrequency
The number of seconds between performing a preventive soft reset in order to
minimize the cases of hanging phones e.g. Nokia 5110 will sometimes freeze to
a state when only after unmounting the battery the phone will be functional
again.
.sp
Default is 0 (not used).
.UNINDENT
.INDENT 0.0
.TP
.B HardResetFrequency
New in version 1.28.92.

.sp
\fBWARNING:\fP
.INDENT 7.0
.INDENT 3.5
For some phones hard reset means deleting all data in it. Use
\fI\%ResetFrequency\fP instead, unless you know what you are
doing.
.UNINDENT
.UNINDENT
.sp
The number of seconds between performing a preventive hard reset in order to
minimize the cases of hanging phones.
.sp
Default is 0 (not used).
.UNINDENT
.INDENT 0.0
.TP
.B DeliveryReport
Whether delivery reports should be used, one of \fBno\fP, \fBlog\fP, \fBsms\fP\&.
.INDENT 7.0
.TP
.B \fBlog\fP
one line log entry,
.TP
.B \fBsms\fP
store in inbox as a received SMS
.TP
.B \fBno\fP
no delivery reports
.UNINDENT
.sp
Default is \fBno\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B DeliveryReportDelay
Delay in seconds how long is still delivery report considered valid. This
depends on brokenness of your network (delivery report should have same
timestamp as sent message). Increase this if delivery reports are not paired
with sent messages.
.sp
Default is 600 (10 minutes).
.UNINDENT
.INDENT 0.0
.TP
.B PhoneID
String with info about phone used for sending/receiving. This can be useful if
you want to run several SMS daemons (see \fI\%Multiple modems\fP).
.sp
When you set PhoneID, all messages (including injected ones) will be marked
by this string (stored as SenderID in the database) and it allows more SMS
daemons to share a single database.
.sp
SMSD daemon will in such case send outbox messages only with
matching or empty SenderID.
.sp
This option has actually no effect with gammu\-smsd\-files\&.
.UNINDENT
.INDENT 0.0
.TP
.B SMSC
New in version 1.36.2.

.sp
SMSC number to use for sending messages if not specified in the message
(see options of gammu\-smsd\-inject).
.sp
In most cases you don\(aqt need this settings as Gammu tries to read correct
SMSC from phone, but sometimes this fails (try \fBgammu getsmsc\fP).
.UNINDENT
.INDENT 0.0
.TP
.B RunOnReceive
Executes a program after receiving message.
.sp
This parameter is executed through shell, so you might need to escape some
special characters and you can include any number of parameters. Additionally
parameters with identifiers of received messages are appended to the command
line. The identifiers depend on used service backend, typically it is ID of
inserted row for database backends or file name for file based backends.
.sp
Gammu SMSD waits for the script to terminate. If you make some time consuming
there, it will make SMSD not receive new messages. However to limit breakage
from this situation, the waiting time is limited to two minutes. After this
time SMSD will continue in normal operation and might execute your script
again.
.sp
The process has available lot of information about received message in
environment, check gammu\-smsd\-run for more details.
.UNINDENT
.INDENT 0.0
.TP
.B RunOnFailure
New in version 1.28.93.

.sp
Executes a program on failure.
.sp
This can be used to proactively react on some failures or to interactively
detect failure of sending message.
.sp
The program will receive optional parameter, which can currently be either
\fBINIT\fP (meaning failure during phone initialization) or message ID,
which would indicate error while sending the message.
.sp
\fBNOTE:\fP
.INDENT 7.0
.INDENT 3.5
The environment with message (as is in \fI\%RunOnReceive\fP) is not passed to the command.
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B RunOnSent
New in version 1.36.4.

.sp
Executes a program after sending message.
.sp
The program will receive optional parameter a message ID and environment
with message details as described in gammu\-smsd\-run\&.
.UNINDENT
.INDENT 0.0
.TP
.B RunOnIncomingCall
New in version 1.38.5.

.sp
Executes a program after cancelling incoming call.
.sp
The program will receive a parameter with a phone number of the call.
This requires \fI\%HangupCalls\fP to be enabled.
.UNINDENT
.INDENT 0.0
.TP
.B IncludeNumbersFile
File with list of numbers which are accepted by SMSD. The file contains one
number per line, blank lines are ignored. The file is read at startup and is
reread only when configuration is being reread. See Message filtering for
details.
.UNINDENT
.INDENT 0.0
.TP
.B ExcludeNumbersFile
File with list of numbers which are not accepted by SMSD. The file contains
one number per line, blank lines are ignored. The file is read at startup and
is reread only when configuration is being reread. See Message filtering for
details.
.UNINDENT
.INDENT 0.0
.TP
.B IncludeSMSCFile
File with list of SMSC numbers which are accepted by SMSD. The file contains
one number per line, blank lines are ignored. The file is read at startup and
is reread only when configuration is being reread. See Message filtering for
details.
.UNINDENT
.INDENT 0.0
.TP
.B ExcludeSMSCFile
File with list of SMSC numbers which are not accepted by SMSD. The file
contains one number per line, blank lines are ignored. The file is read at
startup and is reread only when configuration is being reread. See Message
filtering for details.
.UNINDENT
.INDENT 0.0
.TP
.B BackendRetries
How many times will SMSD backend retry operation.
.sp
The implementation on different backends is different, for database backends
it generally means how many times it will try to reconnect to the server.
.sp
Default is 10.
.UNINDENT
.INDENT 0.0
.TP
.B Send
New in version 1.28.91.

.sp
Whether to enable sending of messages.
.sp
Default is True.
.UNINDENT
.INDENT 0.0
.TP
.B Receive
New in version 1.28.91.

.sp
Whether to enable receiving of messages.
.sp
Default is True.
.UNINDENT
.SH DATABASE BACKENDS OPTIONS
.sp
All DBI, ODBC, MYSQL and PGSQL backends (see gammu\-smsd\-mysql,
gammu\-smsd\-odbc, gammu\-smsd\-pgsql, gammu\-smsd\-dbi for
their documentation) supports same options for configuring connection to a
database:
.INDENT 0.0
.TP
.B User
User name used for connection to a database.
.UNINDENT
.INDENT 0.0
.TP
.B Password
Password used for connection to a database.
.UNINDENT
.INDENT 0.0
.TP
.B Host
Database server address. It can also contain port or socket path after
semicolon, for example \fBlocalhost:/path/to/socket\fP or
\fB192.168.1.1:8000\fP\&.
.sp
For ODBC this is used as Data source name.
.sp
\fBNOTE:\fP
.INDENT 7.0
.INDENT 3.5
Some database servers differentiate usage of \fBlocalhost\fP (to use
local socket) and \fB127.0.0.1\fP (to use locat TCP/IP connection).
Please make sure your SMSD settings match the database server ones.
.UNINDENT
.UNINDENT
.sp
New in version 1.28.92.

.UNINDENT
.INDENT 0.0
.TP
.B PC
Deprecated since version 1.28.92: Please use \fI\%Host\fP instead.

.sp
Synonym for \fI\%Host\fP, kept for backwards compatibility.
.UNINDENT
.INDENT 0.0
.TP
.B Database
Name of database (or schema) to use and where SMSD can find it\(aqs tables.
.sp
Please note that you should create tables in this database before using
gammu\-smsd. SQL files for creating needed tables are included in
documentation for individual database backends: gammu\-smsd\-mysql,
gammu\-smsd\-odbc, gammu\-smsd\-pgsql, gammu\-smsd\-dbi
.UNINDENT
.INDENT 0.0
.TP
.B SkipSMSCNumber
When you send sms from some SMS centers you can have delivery reports from
other SMSC number. You can set here number of this SMSC used by you and Gammu
will not check it\(aqs number during assigning reports to sent SMS.
.UNINDENT
.INDENT 0.0
.TP
.B Driver
SQL driver to use, Gammu supports several native drivers and generic
interface using ODBC and DBI. Availability of the backends depends on
compile time options.
.sp
Available drivers:
.sp
\fBodbc\fP
.INDENT 7.0
.INDENT 3.5
Connects to the database using ODBC, see gammu\-smsd\-odbc\&.
.UNINDENT
.UNINDENT
.sp
\fBnative_mysql\fP
.INDENT 7.0
.INDENT 3.5
Stores messages in MySQL database, see gammu\-smsd\-mysql for
details.
.UNINDENT
.UNINDENT
.sp
\fBnative_pgsql\fP
.INDENT 7.0
.INDENT 3.5
Stores messages in PostgreSQL database, see gammu\-smsd\-pgsql for
details.
.UNINDENT
.UNINDENT
.sp
\fBdb2\fP, \fBfirebird\fP, \fBfreetds\fP, \fBingres\fP, \fBmsql\fP, \fBmysql\fP, \fBoracle\fP, \fBpgsql\fP, \fBsqlite\fP, \fBsqlite3\fP
.INDENT 7.0
.INDENT 3.5
Stores messages using DBI library in given backend. You need to have
installed appropriate DBI driver to make it work. See
gammu\-smsd\-dbi for details.
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B SQL
SQL dialect to use. This is specially useful with gammu\-smsd\-odbc where SMSD
does not know which server it is actually talking to.
.sp
Possible values:
.INDENT 7.0
.IP \(bu 2
\fBmysql\fP \- MySQL
.IP \(bu 2
\fBpgsql\fP \- PostgreSQL
.IP \(bu 2
\fBsqlite\fP \- SQLite
.IP \(bu 2
\fBmssql\fP \- Microsoft SQL Server
.IP \(bu 2
\fBsybase\fP \- Sybase
.IP \(bu 2
\fBaccess\fP \- Microsoft Access
.IP \(bu 2
\fBoracle\fP \- Oracle
.IP \(bu 2
\fBodbc\fP \- Generic ODBC
.UNINDENT
.sp
New in version 1.28.93.

.sp
\fBSEE ALSO:\fP
.INDENT 7.0
.INDENT 3.5
You can also completely customize SQL queries used as described in SQL Queries\&.
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B DriversPath
Path, where DBI drivers are stored, this usually does not have to be set if
you have properly installed drivers.
.UNINDENT
.INDENT 0.0
.TP
.B DBDir
Database directory for some (currently only sqlite) DBI drivers. Set here path
where sqlite database files are stored.
.UNINDENT
.SS Files backend options
.sp
The FILES backend accepts following configuration options. See
gammu\-smsd\-files for more detailed service backend description. Please note
that all path should contain trailing path separator (/ on Unix systems):
.INDENT 0.0
.TP
.B InboxPath
Where the received SMSes are stored.
.sp
Default is current directory.
.UNINDENT
.INDENT 0.0
.TP
.B OutboxPath
Where SMSes to be sent should be placed.
.sp
Default is current directory.
.UNINDENT
.INDENT 0.0
.TP
.B SentSMSPath
Where the transmitted SMSes are placed, if same as \fI\%OutboxPath\fP transmitted
messages are deleted.
.sp
Default is to delete transmitted messages.
.UNINDENT
.INDENT 0.0
.TP
.B ErrorSMSPath
Where SMSes with error in transmission is placed.
.sp
Default is same as \fI\%SentSMSPath\fP\&.
.UNINDENT
.INDENT 0.0
.TP
.B InboxFormat
The format in which the SMS will be stored: \fBdetail\fP, \fBunicode\fP, \fBstandard\fP\&.
.INDENT 7.0
.TP
.B \fBdetail\fP
format used for message backup by gammu, see gammu\-smsbackup\&.
.TP
.B \fBunicode\fP
message text stored in unicode (UTF\-16)
.TP
.B \fBstandard\fP
message text stored in system charset
.UNINDENT
.sp
The \fBstandard\fP and \fBunicode\fP settings do not apply for 8\-bit messages, which
are always written raw as they are received with extension .bin.
.sp
Default is \fBunicode\fP\&.
.sp
\fBNOTE:\fP
.INDENT 7.0
.INDENT 3.5
In \fBdetail\fP format, all message parts are stored into single file,
for all others each message part is saved separately.
.UNINDENT
.UNINDENT
.UNINDENT
.INDENT 0.0
.TP
.B OutboxFormat
The format in which messages created by gammu\-smsd\-inject will be stored,
it accepts same values as InboxFormat.
.sp
Default is \fBdetail\fP if Gammu is compiled in with backup functions, \fBunicode\fP
otherwise.
.UNINDENT
.INDENT 0.0
.TP
.B TransmitFormat
The format for transmitting the SMS: \fBauto\fP, \fBunicode\fP, \fB7bit\fP\&.
.sp
This option is used only if \fI\%OutboxFormat\fP is not set to
\fBdetail\fP\&. In such case encoding specified in the message is used (you can
specify it to gammu\-smsd\-inject).
.sp
Default is \fBauto\fP\&.
.UNINDENT
.SH MESSAGE FILTERING
.sp
SMSD allows one to process only limited subset of incoming messages. You can define
filters for sender number in \fI\%[include_numbers]\fP and
\fI\%[exclude_numbers]\fP sections or using
\fI\%IncludeNumbersFile\fP and \fI\%ExcludeNumbersFile\fP
directives.
.sp
If \fI\%[include_numbers]\fP section exists, all values (keys are
ignored) from it are used as allowed phone numbers and no other message is
processed. On the other side, in \fI\%[exclude_numbers]\fP you can
specify numbers which you want to skip.
.sp
Lists from both sources are merged together. If there is any number in include
list, only include list is used and only messages in this list are being
accepted. If include list is empty, exclude list can be used to ignore
messages from some numbers. If both lists are empty, all messages are
accepted.
.sp
Similar filtering rules can be used for SMSC number filtering, they just use
different set of configuration options \- \fI\%[include_smsc]\fP and
\fI\%[exclude_smsc]\fP sections or \fI\%IncludeSMSCFile\fP
and \fI\%ExcludeSMSCFile\fP directives.
.SH EXAMPLES
.sp
There is more complete example available in Gammu documentation. Please note
that for simplicity following examples do not include \fB[gammu]\fP
section, you can look into gammurc for some examples how it can look like.
.SS Files service
.sp
SMSD configuration file for FILES backend could look like:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[smsd]
Service = files
PIN = 1234
LogFile = syslog
InboxPath = /var/spool/sms/inbox/
OutboxPath = /var/spool/sms/outbox/
SentSMSPath = /var/spool/sms/sent/
ErrorSMSPath = /var/spool/sms/error/
.ft P
.fi
.UNINDENT
.UNINDENT
.SS MySQL service
.sp
If you want to use MYSQL backend, you will need something like this:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[smsd]
Service = sql
Driver = native_mysql
PIN = 1234
LogFile = syslog
User = smsd
Password = smsd
PC = localhost
Database = smsd
.ft P
.fi
.UNINDENT
.UNINDENT
.SS DBI service using SQLite
.sp
For gammu\-smsd\-dbi backend, in this particular case SQLite:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[smsd]
Service = sql
Driver = sqlite3
DBDir = /var/lib/sqlite3
Database = smsd.db
.ft P
.fi
.UNINDENT
.UNINDENT
.SS ODBC service using MySQL
.sp
For gammu\-smsd\-odbc backend, in this particular case using DSN \fBsmsd\fP server:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[smsd]
Service = sql
Driver = odbc
Host = smsd
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
The DSN definition (in \fB~/.odbc.ini\fP on UNIX) for using MySQL server would look like:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[smsd]
Description         = MySQL
Driver              = MySQL
Server              = 127.0.0.1
Database            = smsd
Port                =
Socket              =
Option              =
Stmt                =

[smsdsuse]
Driver              = MySQL ODBC 3.51.27r695 Driver
DATABASE            = smsd
SERVER              = 127.0.0.1
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Numbers filtering
.sp
Process only messages from 123456 number:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[include_numbers]
number1 = 123456
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
Do not process messages from evil number 666:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[exclude_numbers]
number1 = 666
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Debugging
.sp
Enabling debugging:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[smsd]
debuglevel = 255
logfile = smsd.log
.ft P
.fi
.UNINDENT
.UNINDENT
.SS Multiple modems
.sp
You can run any number of SMSD instances and they can even share same backend
database. For routing the messages, you need to set different
\fI\%PhoneID\fP for each instance and set \fBSenderID\fP column in
outbox table.
.sp
Following example shows configuration for two modems, but you can have any
number of SMSD instances. The only limitation is performance of your hardware,
especially if all modems are connected using USB.
.sp
Configuration for first SMSD:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[gammu]
device = /dev/ttyACM0
connection = at

[smsd]
Service = sql
Driver = native_mysql
PIN = 1234
LogFile = syslog
User = smsd
Password = smsd
PC = localhost
Database = smsd
PhoneID = first
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
Configuration for second SMSD:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
[gammu]
device = /dev/ttyACM1
connection = at

[smsd]
Service = sql
Driver = native_mysql
PIN = 1234
LogFile = syslog
User = smsd
Password = smsd
PC = localhost
Database = smsd
PhoneID = second
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
You can then start two separate instances of SMSD:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
gammu\-smsd \-c /path/to/first\-smsdrc
gammu\-smsd \-c /path/to/second\-smsdrc
.ft P
.fi
.UNINDENT
.UNINDENT
.SH AUTHOR
Michal Čihař <michal@cihar.com>
.SH COPYRIGHT
2009-2015, Michal Čihař <michal@cihar.com>
.\" Generated by docutils manpage writer.
.