Scroll to navigation

EBOOK-CONVERT(1) calibre EBOOK-CONVERT(1)

NAME

ebook-convert - ebook-convert

ebook-convert input_file output_file [options]


Convert an e-book from one format to another.

input_file is the input and output_file is the output. Both must be specified as the first two arguments to the command.

The output e-book format is guessed from the file extension of output_file. output_file can also be of the special format .EXT where EXT is the output file extension. In this case, the name of the output file is derived from the name of the input file. Note that the filenames must not start with a hyphen. Finally, if output_file has no extension, then it is treated as a folder and an "open e-book" (OEB) consisting of HTML files is written to that folder. These files are the files that would normally have been passed to the output plugin.

After specifying the input and output file you can customize the conversion by specifying various options. The available options depend on the input and output file types. To get help on them specify the input and output file and then use the -h option.

For full documentation of the conversion system see E-book conversion

Whenever you pass arguments to ebook-convert that have spaces in them, enclose the arguments in quotation marks. For example: "/some path/with spaces"

The options and default values for the options change depending on both the input and output formats, so you should always check with:

ebook-convert myfile.input_format myfile.output_format -h


Below are the options that are common to all conversion, followed by the options specific to every input and output format.

  • УЛАЗНЕ МОГУЋНОСТИ
  • ИЗЛАЗНЕ МОГУЋНОСТИ
  • LOOK AND FEEL
  • HEURISTIC PROCESSING
  • SEARCH AND REPLACE
  • STRUCTURE DETECTION
  • TABLE OF CONTENTS
  • METADATA
  • DEBUG

прикажи ову поруку помоћи па изађи

Изаберите улазни профил. Улазни профил даје инфромације систему за претварање о томе како да интерпретира различите информације у улазном документу. На пример, дужине које зависе од резолуције (т.ј. дужине у пикселима). Могући избори су: cybookg3, cybook_opus, default, hanlinv3, hanlinv5, illiad, irexdr1000, irexdr800, kindle, msreader, mobipocket, nook, sony, sony300, sony900

List builtin recipe names. You can create an e-book from a builtin recipe like this: ebook-convert "Recipe Name.recipe" output.epub

Specify the output profile. The output profile tells the conversion system how to optimize the created document for the specified device (such as by resizing images for the device screen size). In some cases, an output profile can be used to optimize the output for a particular device, but this is rarely necessary. Choices are:cybookg3, cybook_opus, default, generic_eink, generic_eink_hd, generic_eink_large, hanlinv3, hanlinv5, illiad, ipad, ipad3, irexdr1000, irexdr800, jetbook5, kindle, kindle_dx, kindle_fire, kindle_oasis, kindle_pw, kindle_pw3, kindle_voyage, kobo, msreader, mobipocket, nook, nook_color, nook_hd_plus, pocketbook_inkpad3, pocketbook_lux, pocketbook_hd, pocketbook_900, pocketbook_pro_912, galaxy, sony, sony300, sony900, sony-landscape, sonyt3, tablet

прикажи број верзије програма и изађи

УЛАЗНЕ МОГУЋНОСТИ

Могућности које контролишу обраду улазне mobi датотеке

Одредите кодни распоред улазног документа. Ако је подешено ова могућност ће заменити све кодне распореде означене у самом документу. Ово је посебно корисно за документе који у себи не садрже ниједан кодни распоред, или у којима су назнаке кодног распореда неисправне

ИЗЛАЗНЕ МОГУЋНОСТИ

Подешавања која контролишу резултат обраде epub

Turn off splitting at page breaks. Normally, input files are automatically split at every page break into two files. This gives an output e-book that can be parsed faster and with less resources. However, splitting is slow and if your source file contains a very large number of page breaks, you should turn off splitting on page breaks.

Ово подешавање је потребно само ако намеравате да користите EPUB формат с FBReaderJ. Ово ће "изравнати" датотеке система у EPUBu и поставити све датотеке на највиши ниво хијерархије.

Insert an inline Table of Contents that will appear as part of the main book content.

Put the inserted inline Table of Contents at the end of the book instead of the start.

The version of the EPUB file to generate. EPUB 2 is the most widely compatible, only use EPUB 3 if you know you actually need it.

Extract the contents of the generated EPUB file to the specified folder. The contents of the folder are first deleted, so be careful.

Split all HTML files larger than this size (in KB). This is necessary as most EPUB readers cannot handle large file sizes. The default of 260KB is the size required for Adobe Digital Editions. Set to 0 to disable size based splitting.

Обично, ако улазна датотека нема насловну страну, а ви нисте дефинисали своју, биће направљена подразумевана насловна страна која садржи наслов, ауторе, итд. Ова могућност онемогућава прављење подразумеване насловне стране.

Не користи SVG формат за корице књиге. Користите ову могућност ако ће ваша EPUB књига бити коришћена на уређају који не подржава SVG формат, као што је iPhone, или JetBook Lite. Без коришћења ове могућности овакви уређаји ће уместо корица приказати празну страну.

Када се користи SVG корице ова могућност ће му променити величину сразмерно расположивој величини екрана, чувајући оригиналне размере (однос ширине и висине). Ово значи да ће се можда појавити белине у врху, или на дну стране, али слика неће бити изобличена. Без ове могућности слика може бити делимично изобличена, али неће бити белина по ивицама.

Ако је изабрано, додатак ће покушати да направи што читљивији излаз за корисника. Ово не мора да има утицај на све изабране додатке.

Наслов за аутоматски направљен садржај.

LOOK AND FEEL

Подешавања која контролишу изглед резултата обраде

Transliterate Unicode characters to an ASCII representation. Use with care because this will replace Unicode characters with ASCII. For instance it will replace "Pelé" with "Pele". Also, note that in cases where there are multiple representations of a character (characters shared by Chinese and Japanese for instance) the representation based on the current calibre interface language will be used.

The base font size in pts. All font sizes in the produced book will be rescaled based on this size. By choosing a larger size you can make the fonts in the output bigger and vice versa. By default, when the value is zero, the base font size is chosen based on the output profile you chose.

Промени поравнање текста. Вредност "Лево" преводи сав и лево и десно поравнат текст у лево поравнат (тј. непоравнат). Вредност "Поравнај" преводи сав непоравнат текст у текст поравнат и лево и десно. Вредност "Изворно" не мења поравнање. Обратите пажњу да само неки формати подржавају поравнање текста.

Онемогући било какву промену величине слова.

Embed every font that is referenced in the input document but not already embedded. This will search your system for the fonts, and if found, they will be embedded. Embedding will only work if the format you are converting to supports embedded fonts, such as EPUB, AZW3, DOCX or PDF. Please ensure that you have the proper license for embedding the fonts used in this document.

Embed the specified font family into the book. This specifies the "base" font used for the book. If the input document specifies its own fonts, they may override this base font. You can use the filter style information option to remove fonts from the input document. Note that font embedding only works with some output formats, principally EPUB, AZW3 and DOCX.

By default, calibre will use the shorthand form for various CSS properties such as margin, padding, border, etc. This option will cause it to use the full expanded form instead. Note that CSS is always expanded when generating EPUB files with the output profile set to one of the Nook profiles as the Nook cannot handle shorthand CSS.

Путања до датотеке са CSS описом, или сам CSS опис. Овај CSS опис ће бити додат у стилска правила која се већ налазе у изворној датотеци те се стога може користити и да их промени.

A comma separated list of CSS properties that will be removed from all CSS style rules. This is useful if the presence of some style information prevents it from being overridden on your device. For example: font-family,color,margin-left,margin-right

Веза између назива типова слова у CSS опису и величине слова у штампарским тачкама . На пример, 12,12,14,16,18,20,22,24. Ово повезује величине слова од xx-small до xx-large, где се ова последња величина користи за највећа слова. Алгоритам за промену величине слова користи ове величине да би претварање учинио што "паметнијом". Подразумевана веза је она наведена у изабраном излазном профилу.

Убаци празан ред између пасуса. Не ради ако улазна датотека не користи пасусе (одреднице <p>, или <div>ознаке).

Подесите висину уметнутих празних редова (у еm). Висина линија између пасуса биће двоструко већа од вредности подешене овде.

Сачувај лигатуре у улазном документу. Лигатура је посебан начин за приказивање парова слова као што су ff, fi, fl, итд. Већина читача не подржава лигатуре у подразумеваној врсти слова и мало је вероватно да ће их исправно приказати. У подразумеваном стању calibre ће претворити лигатуре у парове обичних слова. Ова могућност ће их сачувати непромењене.

Висина реда у штампарским тачкама. Контролише размак између редова. Односи се само на елементе који не задају сопствену висину реда. У већини случајева подешавање минималне висине реда је много корисније. Подразумева се да неће бити измене висине реда.

Неки лоше створени документи користе табеле да би одредили изглед текста на страни. После претварања оваквих докумената текст често излази ван граница стране, а могући су и други визуелни проблеми. Избором ове могућности садржина табела ће бити представљена линеарно како би се избегли горе наведени проблеми.

Set the bottom margin in pts. Default is 5.0. Setting this to less than zero will cause no margin to be set (the margin setting in the original document will be preserved). Note: Page oriented formats such as PDF and DOCX have their own margin settings that take precedence.

Set the left margin in pts. Default is 5.0. Setting this to less than zero will cause no margin to be set (the margin setting in the original document will be preserved). Note: Page oriented formats such as PDF and DOCX have their own margin settings that take precedence.

Set the right margin in pts. Default is 5.0. Setting this to less than zero will cause no margin to be set (the margin setting in the original document will be preserved). Note: Page oriented formats such as PDF and DOCX have their own margin settings that take precedence.

Set the top margin in pts. Default is 5.0. Setting this to less than zero will cause no margin to be set (the margin setting in the original document will be preserved). Note: Page oriented formats such as PDF and DOCX have their own margin settings that take precedence.

Минимална висина реда, дата као проценат од израчунате величине слова. calibre ће обезбедити да сваки елемент има најмање оволику висину реда, без обзира на то шта је наведено у улазном документу. Поставите на нулу да бисте онемогућили. Користите ово подешавање пре него да поставите апсолутну висину реда, уколико не знате тачно шта радите. На пример, двоструку висину ћете постићи ако овде наведете 240.

Уклони додатни размак између пасуса. Такође увуци све пасусе за 1.5em. Уклањање размака неће радити ако улазна датотека не користи пасусе (одреднице <p>, или <div>ознаке).

When calibre removes blank lines between paragraphs, it automatically sets a paragraph indent, to ensure that paragraphs can be easily distinguished. This option controls the width of that indent (in em). If you set this value negative, then the indent specified in the input document is used, that is, calibre does not change the indentation.

Convert plain quotes, dashes and ellipsis to their typographically correct equivalents. For details, see https://daringfireball.net/projects/smartypants.

Subset all embedded fonts. Every embedded font is reduced to contain only the glyphs used in this document. This decreases the size of the font files. Useful if you are embedding a particularly large font with lots of unused glyphs.

Path to a file containing rules to transform the CSS styles in this book. The easiest way to create such a file is to use the wizard for creating rules in the calibre GUI. Access it in the "Look & feel->Transform styles" section of the conversion dialog. Once you create the rules, you can use the "Export" button to save them to a file.

Path to a file containing rules to transform the HTML in this book. The easiest way to create such a file is to use the wizard for creating rules in the calibre GUI. Access it in the "Look & feel->Transform HTML" section of the conversion dialog. Once you create the rules, you can use the "Export" button to save them to a file.

Convert fancy quotes, dashes and ellipsis to their plain equivalents.

HEURISTIC PROCESSING

Modify the document text and structure using common patterns. Disabled by default. Use --enable-heuristics to enable. Individual actions can be disabled with the --disable-* options.

Analyze hyphenated words throughout the document. The document itself is used as a dictionary to determine whether hyphens should be retained or removed.

Уклони празне пасусе из документа ако се налазе између сваког другог пасуса.

Укључи увлачење сачињено од вишеструких размака у CSS увлачење.

Left aligned scene break markers are center aligned. Replace soft scene breaks that use multiple blank lines with horizontal rules.

Тражи уобичајене речи и шаблоне које означавају искошено и претвори их у искошено.

Откриј неформатиране наслове поглавља и поднаслове. Промени их у h1 и h2 ознаке. Ова могућност неће направити садржај, осим ако се користи заједно с избором за откривање структуре документа.

Looks for occurrences of sequential <h1> or <h2> tags. The tags are renumbered to prevent splitting in the middle of chapter headings.

Спој редове користећи интерпункцију и друге трагове обликовања.

Омогући хеуристичку обраду. Ова могућност мора бити укључена да би била извршена хеуристичка обрада.

Размера коришћена за одређивање места на коме ће бити поништен прелом реда. Дозвољене вредности су разломљени бројеви од 0 до 1. Подразумевана вредност је 0,4, одмах испод линије средње дужине. Ако само неколико редова у документу треба да буде спојено, ову вредност треба смањити.

Replace scene breaks with the specified text. By default, the text from the input document is used.

SEARCH AND REPLACE

Измени текст и структуру документа употребом корисничких шаблона

Path to a file containing search and replace regular expressions. The file must contain alternating lines of regular expression followed by replacement pattern (which can be an empty line). The regular expression must be in the Python regex syntax and the file must be UTF-8 encoded.

Замена да промените текст нађен sr1-претрагом

Search pattern (regular expression) to be replaced with sr1-replace.

Замена да промените текст нађен sr2-претрагом

Search pattern (regular expression) to be replaced with sr2-replace.

Замена да промените текст нађен sr3-претрагом

Search pattern (regular expression) to be replaced with sr3-replace.

STRUCTURE DETECTION

Контрола аутоматског одређивања структуре документа.

An XPath expression to detect chapter titles. The default is to consider <h1> or <h2> tags that contain the words "chapter", "book", "section", "prologue", "epilogue" or "part" as chapter titles as well as any tags that have class="chapter". The expression used must evaluate to a list of elements. To disable chapter detection, use the expression "/". See the XPath Tutorial in the calibre User Manual for further help on using this feature.

--chapter-mark
Наведите како ће се означити откривена поглавља. Навођење "pagebreak" доводи до додавања знака за нови ред пре сваког поглавља. Вредност "rule" додаје хоризонталну линију. Вредност "none" искључује посебно означавање поглавља, а вредност "both" додаје и нови ред и водоравну линију.

Some documents specify page margins by specifying a left and right margin on each individual paragraph. calibre will try to detect and remove these margins. Sometimes, this can cause the removal of margins that should not have been removed. In this case you can disable the removal.

Insert the book metadata at the start of the book. This is useful if your e-book reader does not support displaying/searching metadata directly.

An XPath expression. Page breaks are inserted before the specified elements. To disable use the expression: /

Користи насловну страну из улазне датотеке уместо посебно наведене.

Remove the first image from the input e-book. Useful if the input document has a cover image that is not identified as a cover. In this case, if you set a cover in calibre, the output document will end up with two cover images if you do not specify this option.

An XPath expression to detect the location in the document at which to start reading. Some e-book reading programs (most prominently the Kindle) use this location as the position at which to open the book. See the XPath tutorial in the calibre User Manual for further help using this feature.

TABLE OF CONTENTS

Надзор аутоматског прављења Садржаја. Подразумева се да ће, ако улазна датотека већ има Садржај, он ће бити коришћен уместо аутоматског.

When creating a TOC from links in the input document, allow duplicate entries, i.e. allow more than one entry with the same text, provided that they point to a different location.

XPath expression that specifies all tags that should be added to the Table of Contents at level one. If this is specified, it takes precedence over other forms of auto-detection. See the XPath Tutorial in the calibre User Manual for examples.

XPath expression that specifies all tags that should be added to the Table of Contents at level two. Each entry is added under the previous level one entry. See the XPath Tutorial in the calibre User Manual for examples.

XPath expression that specifies all tags that should be added to the Table of Contents at level three. Each entry is added under the previous level two entry. See the XPath Tutorial in the calibre User Manual for examples.

Највећи број одредница које ће бити додате у садржај. Постави на 0 да онемогућиш ову могућност. Подразумева се: 50. Одреднице се додају у садржај само ако је број откривених поглавља мањи од задатог.

Немој додавати аутоматски откривена поглавља у садржају.

Искључи одреднице из садржаја ако њихови наслови одговарају задатом регуларном изразу. Биће уклоњене све такве одреднице, као и оне које су испод њих у хијерархији.

Ако се открије мање од овог броја поглавља, она ће бити додата у садржај. Подразумева се: 6

Обично, ако улазна датотека већ има садржај, он ће бити коришћен уместо аутоматски направљеног. Избором ове могућности можете да учините да се увек користи аутоматски направљен садржај.

METADATA

Подешавања за уписивање метаподатака у излазној датотеци

Израз који ће бити коришћен за разврставање по имену аутора.

Постави имена аутора. Ако их има више, треба да буду раздвојена зарезима.

Наведи продуцента књиге.

Set the e-book description.

Израз који ће бити коришћен за разврставање по имену аутора. За насловну страну користи неведену датотеку, или УРЛ

Наведи ISBN број књиге.

Наведи језик

Set the publication date (assumed to be in the local timezone, unless the timezone is explicitly specified)

Set the e-book publisher.

Наведи оцену. Треба да буде бројчана, између 1 и 5.

Прочитај метаподатке из наведене OPF датотеке. Метаподаци прочитани из ове датотеке имају предност над свим метаподацима у изворној датотеци.

Set the series this e-book belongs to.

--series-index
Наведи број књиге у овој серији.

Изабери етикете за књигу. Листа раздвојена зарезима.

Set the book timestamp (no longer used anywhere)

Постави наслов.

--title-sort
Верзија наслова који ће се користити за разврставање

DEBUG

Подешавања која помажу да исправите грешке при претварању

Save the output from different stages of the conversion pipeline to the specified folder. Useful if you are unsure at which stage of the conversion process a bug is occurring.

Level of verbosity. Specify multiple times for greater verbosity. Specifying it twice will result in full verbosity, once medium verbosity and zero times least verbosity.

AUTHOR

Kovid Goyal

COPYRIGHT

Kovid Goyal

јун 17, 2022 5.44.0