NAME¶

GTKTerm - A simple GTK+ serial port terminal

SYNOPSIS¶

gtkterm [ options ]

DESCRIPTION¶

gtkterm is a simple GTK+ terminal used to communicate with the serial port.

OPTIONS¶

gtkterm accepts the following options:

-h, --help Help screen.

-c, --config <configuration>

Load configuration (default is "default").

-p, --port <device>

Serial port device (default /dev/ttyS0).

-s, --speed <speed>

Serial port speed (default 115200).

-b, --bits <bits>

Number of bits (default 8).

-t, --stopbits <stopbits>

Number of stopbits (default 1).

-a, --parity <odd | even>

Partity (default none).

-w, --flow <Xon | CTS>

Flow control (default none).

-d, --delay <ms>

End of line delay in ms (default none).

-r, --char <char>

Wait for a special char at end of line (default none).

-f, --file <filename>

Default file to send (default none).

-e, --echo

Set local echo.

-x, --rts_time_before <ms>

For rs485, time in ms before transmit with rts on

-y, --rts_time_after <ms>

For rs485, time in ms after transmit with rts on

-e, --echo

Switch on local echo

-L, --disable-port-lock

Do not lock serial port. Allows to send to serial port from different terminals.

AUTHOR¶

gtkterm was written by Julien Schmitt. Maintained at https://github.com/Jeija/gtkterm by Willem van den Akker, Florian Euchner

This manual page was written by Sebastien Bacher <seb128@debian.org>, for the Debian GNU/Linux system (but may be used by others).