.\" Hey, EMACS: -*- nroff -*- .\" (C) Copyright 2021 Francois Marier .\" .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) .TH tmd710_tncsetup 1 "3 Jan 2021" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: .\" .nh disable hyphenation .\" .hy enable hyphenation .\" .ad l left justify .\" .ad b justify to both left and right margins .\" .nf disable filling .\" .fi enable filling .\" .br insert line break .\" .sp insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME tmd710_tncsetup \- tool to configure the TNC on several Kenwood radios .SH SYNOPSIS .B tmd710_tncsetup .RI [ options ] .SH DESCRIPTION This manual page documents briefly the .B tmd710-tncsetup command. .PP .\" TeX users may be more comfortable with the \fB\fP and .\" \fI\fP escape sequences to invode bold face and italics, .\" respectively. .SH OPTIONS These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below. You must supply at least two arguments: the band (0 for Band A, 1 for Band B) and the serial port .TP .B \-B, \-\-band the frequency band to use (0 for Band A or 1 for Band B) .TP .B \-S, \-\-serialport the serial port to use for communication with the operation panel .TP .B \-b, \-\-baudrate sets the HBAUD parameter (TNC speed, 1200 or 9600 baud) .TP .B \-m, \-\-maxframe sets the MAXFRAME parameter (1-7) .TP .B \-p, \-\-paclen sets the PACLEN parameter (0-255) .TP .B \-d, \-\-txdelay sets the TXDELAY parameter (0-120) .TP .B \-s, \-\-software-flow configure the TNC for software flow-control .TP .B \-h, \-\-hardware-flow configure the TNC for hardware flow-control .TP .B \-c, \-\-callsign configure the callsign .TP .B \-i Initialize TNC (default is into Packet KISS mode) 1 : TNC off 2 : Packet command mode only .TP .B \-V, \-\-version display the version .br .SH AUTHOR Written by Francois Marier .sp Project Homepage: https://github.com/fmarier/tmd710_tncsetup